home *** CD-ROM | disk | FTP | other *** search
- Household Register Installation Instructions
- =========================================
- Household Regsister is a dos program but is compatible with Win 3.1 and Win
- 95. The program comes with two installation routines. One to install the
- program strickly as a dos application. The other routine will install the
- program to be run from a program group from Win 3.1 or Windows 95.
-
-
- DOS INSTALLATION AND START-UP
-
- 1. Insert the Household Register disk in the A or B drive as applicable.
-
- 2. Type A:\INSTALL or B:\INSTALL as applicable.
-
- 3. Follow the on screen instructions.
-
- NOTE: If you downloaded the program from a BBS, after unzipping the
- program, change to the directory where you unzipped the program and type
- INSTALL and follow the on screen instructions.
-
- To start the program after installation change to the directory where you
- installed the program (normally C:\HR) and type HR and press the
- enter key. To get to the correct directory type the following:
-
- CD\
- CD\HR
- HR
-
- Press the ENTER key after each line above.
-
-
- WINDOWS 3.1 INSTALLATION and START-UP
-
- 1. Start Windows and the Program Manager
-
- 2. Choose File|RUN
-
- 3.Type A:\SETUP.EXE or B:\SETUP.EXE as applicable.
-
- 4. Answer Yes to the question "Install programs in Program Manager?"
-
- NOTE: If you downloaded the program from a BBS, after unzipping the
- program choose FILE|RUN and type the drive and path where the file is
- located followed by SETUP.EXE. For example: C:\TEMP\SETUP.EXE and follow
- the instructions.
-
- To start the program, click the TurboSystemsCo DOS Apps group, then double
- click the Household Register icon. To switch between full screen mode and a
- dos window mode press the ALT + ENTER key.
-
- WINDOWS 95 INSTALLATION and START-UP
-
- 1. From Windows 95 Click the Start button, point to Settings, then click
- the Control Panel.
-
- 2. On the Control Panel, double click Add/Remove programs.
-
- 3. Follow the on screen instructions.
-
- 4. Answer Yes to the question: "Install programs in Program Manager?"
-
- NOTE: If you downloaded the program from a BBS, after unzipping the
- program start the Windows Explorer, navigate to the directory where
- you unzipped the file and double click on SETUP.EXE. Follow the on
- screen instructions and the program will be installed.
-
- To start the program, click the start button, then Programs, then
- TurboSystemsCo DOS Apps then double click the Household Register icon.
- Press the ALT + ENTER key to switch between full screen an dos window
- mode for the program.
-
-
-
- * PRINTER INSTALLATION *
-
-
-
- The printer installation program is entered by selecting option 4
- on the Main Menu Screen. HR is set-up to work with Epson
- printers and compatibles. You are given five choices (A) Epson
- MX,RX,LQ and Compatibles (B) IBM Pro Printer and Compatibles, (C)
- HP Laser/Deskjet and Compatibles (D) Generic and (E) Cannon.
-
- Normally you should choose A, B, C or E. However if your printer
- does not print correctly try the Generic printer (D). You should
- be able to print all reports except Total Value- Lg, Index Cards
- (3 X 5) and Rolodex Cards. You should also be able to print these
- reports if you can manually set-up your printer for compressed
- print prior to printing the reports.
-
-
- NOTE: The Index Cards (3 X 5) and Rolodex Cards cannot be printed
- correctly on a Laser, DeskJet or Cannon printers in this version.
-
-
-
-
-
-